Gala
Showing 1–12 of 18 results
-

Air Vent
Specification Screwed-In Bonnet • Swivel Disc Rising Stem • Asbestos Free Threaded to BS 21 (ISO7) / ASME B1.20.1 Size... -

BRONZE BALANCING VALVE (THREADED)
TECHNICAL DATA Valve Standard: BS7350 Nominal diameter: 1/2″-2″/DN15–DN50 Working pressure: 25Bar Face-to-face: BS7350 -

Bronze Ball Valve (Threaded)
Specification MSS SP-110 Screwed Body Cap • Full Bore Blow-out Proof Stem • PTFE Seat Threaded to BS 21 (ISO7)... -

Bronze Gate Valve
Specification MSS SP-80 Screwed-In bonnet • Solid Wedge Disc Non-Rising Stem • Integral Seat • Asbestos Free Threaded to BS... -

Bronze Globe Valve
Specification MSS SP-80 Screwed-In Bonnet • Swivel Disc Rising Stem • Asbestos Free Threaded to BS 21 (ISO7) / ASME... -

Bronze Strainer
Specification Y-Pattern Body • Screwed Cap With Plug Stainless Steel 304 Screen • Asbestos Free Threaded to BS 21 (ISO7)... -

Bronze Swing Check Valve
Specification MSS SP-80 Screwed Cap • Swing Type Disc • Integral Seat Threaded to BS 21 (ISO7) / ASME B1.20.1... -

Concentric Wafer Butterfly Valve
Features Replaceable Rubber Seat With Phenolic Backed High Axiality of Pinned Shaft Low Pressure Loss Fusion Bonded Epoxy Powder Coating -

Dual-Plate Wafer Check Valve
Features Spring loaded dual-plate pattern Vulcanized seat -

Dual-Plate Wafer Check Valve
TECHNICAL DATA Valve Standard: MSS SP-71 BSEN 12334 Nominal diameter: 2″-24″/DN50–DN600 Working pressure: 10Bar/16Bar Face-to-face: ANSI B16.10 ISO 5752 Series... -

Fixed Orifice Double Regulating Valve
Specification Y-pattern globe valves having characterized throttling disk tending towards equal percentage performance. Integral square edged entrance orifice plate and... -

Fixed Orifice Double Regulating Valve DN65-DN600
Features Integral orifice plate forming a fixed orifice flow measurement unit with regulation and isolation capacity.